ATC 125
NC - rotary tables
Technical information
|
| |
---|---|---|
Diameter of faceplate, min./max. | mm | 140-180 |
Speed of faceplate, max. | U/min | 166 |
Positioning time for 90°/ 180°* | s | 0.26 / 0.36 |
Diameter of bearing | mm | 121 x 70 |
Ratio of worm gear | 36 : 1 | |
Diameter of center through hole, max. | mm | 40 |
Unit weight, min./ max. | kg | 33 / 41 |
Heigth, appr. | mm | 200 |
Width, appr. | mm | 398 |
Depth, appr. without/with rotary manifold | mm | 153 / 242 |
Servomotor Siemens | 1FT 7034 5AK71-1DA1 | |
Servomotor Fanuc | A 2 HVis / 6000 | |
Servomotor Heidenhain | ./. | |
|
|
|
with horizontal axis applies: |
|
|
Center height | mm | 120 |
Transport load, max. | kg | 120 |
Transport load with support bearing, max. | kg | 140 |
Transport load with counter bearing, max. | kg | 240 |
Tilting torque at the axis of rotation, max. | Nm | 400 |
Tilting torque moment with trunnion, max. | Nm | 500 |
Axial load, max. | N | 2.400 |
Rectangularity incl. tumbling error | mm | 0,02/D=140 |
|
|
|
with vertical axis applies: | ||
Table height | mm | 153 |
Transport load, max. | kg | 360 |
Tilting torque at the axis of rotation, max. | Nm | 600 |
Axial load, max. | N | 4.000 |
Plane parallelism including wobble | mm | 0,01/D=140 |
|
|
|
encoder - system accuracy. | +/- 5 " oder +/- 2,5 " | |
Positioning accuracy at the worm drive | +/- 16´´ | |
Mass torque of inertia, max. | kgm² | 1,2 |
Tangential torque of worm gear, max. | Nm | 110 |
Tangential torque of clamping, max. | Nm | 600 |
Radial run-out center bore, max. | mm | 0,01 |
* including clamping/ unclamping |
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface. Partial extractions from the data sheets may lead to an incorrect equipment select Rev.1.0 / 01.09.2013
ATC 160
NC - rotary tables
Technical information
|
| |
---|---|---|
Diameter of faceplate, min./max. | mm | 160 - 220 |
Speed of faceplate, max. | U/min | 100 |
Positioning time for 90°/ 180°* | s | 0.26 / 0.36 |
Diameter of bearing | mm | 146 x 80 |
Ratio of worm gear | 60 : 1 | |
Diameter of center through hole, max. | mm | 40 |
Unit weight, min./ max. | kg | 40 / 48 |
Heigth, appr. | mm | 230 |
Width, appr. | mm | 421 |
Depth, appr. without/with rotary manifold | mm | 169 / 258 |
Servomotor Siemens | 1FT 7034 5AK71-1DA1 | |
Servomotor Fanuc | A 2 HVis / 6000 | |
Servomotor Heidenhain | ./. | |
|
|
|
with horizontal axis applies: |
|
|
Center height | mm | 140 |
Transport load, max. | kg | 160 |
Transport load with support bearing, max. | kg | 200 |
Transport load with counter bearing, max. | kg | 320 |
Tilting torque at the axis of rotation, max. | Nm | 1.000 |
Tilting torque moment with trunnion, max. | Nm | 1.200 |
Axial load, max. | N | 4.500 |
Rectangularity incl. tumbling error | mm | 0,02/D=160 |
|
|
|
with vertical axis applies: | ||
Table height | mm | 169 |
Transport load, max. | kg | 480 |
Tilting torque at the axis of rotation, max. | Nm | 1.500 |
Axial load, max. | N | 7.500 |
Plane parallelism including wobble | mm | 0,01/D=160 |
|
|
|
encoder - system accuracy. | +/- 5 " oder +/- 2,5 " | |
Positioning accuracy at the worm drive | +/- 11´´ | |
Mass torque of inertia, max. | kgm² | 3 |
Tangential torque of worm gear, max. | Nm | 215 |
Tangential torque of clamping, max. | Nm | 1.000 |
Radial run-out center bore, max. | mm | 0,01 |
* including clamping/ unclamping |
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface. Partial extractions from the data sheets may lead to an incorrect equipment select Rev.1.0 / 01.09.2013
ATC 250
NC - rotary tables
Technical information
|
| |
---|---|---|
Diameter of faceplate, min./max. | mm | 200 - 240 |
Speed of faceplate, max. | U/min | 64 |
Positioning time for 90°/ 180°* | s | 0.44 / 0.67 |
Diameter of bearing | mm | 179 x 120 |
Ratio of worm gear | 60 : 1 | |
Diameter of center through hole, max. | mm | 40 |
Unit weight, min./ max. | kg | 62 / 71 |
Heigth, appr. | mm | 260 |
Width, appr. | mm | 525 |
Depth, appr. without/with rotary manifold | mm | 166 / 255 |
Servomotor Siemens | 1FT 7042 5AK71-1DG1 | |
Servomotor Fanuc | A 4 HVis / 5000 | |
Servomotor Heidenhain | QSY 96G | |
|
|
|
with horizontal axis applies: |
|
|
Center height | mm | 150 |
Transport load, max. | kg | 300 |
Transport load with support bearing, max. | kg | 350 |
Transport load with counter bearing, max. | kg | 600 |
Tilting torque at the axis of rotation, max. | Nm | 2.700 |
Tilting torque moment with trunnion, max. | Nm | 3.200 |
Axial load, max. | N | 9.000 |
Rectangularity incl. tumbling error | mm | 0,02/D=200 |
|
|
|
with vertical axis applies: | ||
Table height | mm | 166 |
Transport load, max. | kg | 900 |
Tilting torque at the axis of rotation, max. | Nm | 4.000 |
Axial load, max. | N | 20.000 |
Plane parallelism including wobble | mm | 0,01/D=200 |
|
|
|
encoder - system accuracy. | +/- 5 " oder +/- 2,5 " | |
Positioning accuracy at the worm drive | +/- 11´´ | |
Mass torque of inertia, max. | kgm² | 15 |
Tangential torque of worm gear, max. | Nm | 460 |
Tangential torque of clamping, max. | Nm | 1.600 |
Radial run-out center bore, max. | mm | 0,01 |
* including clamping/ unclamping |
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface. Partial extractions from the data sheets may lead to an incorrect equipment select Rev.1.0 / 01.09.2013
ATC 350
NC - rotary tables
Technical information
|
| |
---|---|---|
Diameter of faceplate, min./max. | mm | 300 - 450 |
Speed of faceplate, max. | U/min | 42 |
Positioning time for 90°/ 180°* | s | 0.7 / 1.22 |
Diameter of bearing | mm | 280 x 185 |
Ratio of worm gear | 72 : 1 | |
Diameter of center through hole, max. | mm | 40 |
Unit weight, min./ max. | kg | 201 / 236 |
Heigth, appr. | mm | 415 |
Width, appr. | mm | 745 |
Depth, appr. without/with rotary manifold | mm | 256 / 304 |
Servomotor Siemens | 1FT 7084 8AF71-1DG1 | |
Servomotor Fanuc | A22 HVis / 4000 | |
Servomotor Heidenhain | QSY 155D | |
|
|
|
with horizontal axis applies: |
|
|
Center height | mm | 245 |
Transport load, max. | kg | 600 |
Transport load with support bearing, max. | kg | 750 |
Transport load with counter bearing, max. | kg | 1.200 |
Tilting torque at the axis of rotation, max. | Nm | 5.500 |
Tilting torque moment with trunnion, max. | Nm | 6.600 |
Axial load, max. | N | 27.000 |
Rectangularity incl. tumbling error | mm | 0,02/D=300 |
|
|
|
with vertical axis applies: | ||
Table height | mm | 256 |
Transport load, max. | kg | 1.800 |
Tilting torque at the axis of rotation, max. | Nm | 8.000 |
Axial load, max. | N | 40.000 |
Plane parallelism including wobble | mm | 0,01/D=300 |
|
|
|
encoder - system accuracy. | +/- 5 " oder +/- 2,5 " | |
Positioning accuracy at the worm drive | +/- 7´´ | |
Mass torque of inertia, max. | kgm² | 50 |
Tangential torque of worm gear, max. | Nm | 2.100 |
Tangential torque of clamping, max. | Nm | 4.000 |
Radial run-out center bore, max. | mm | 0,01 |
* including clamping/ unclamping |
Many options and modifications are available to enhance the standard designs. We will gladly quote to your specific requirements. Please contact us.
We reserve the right for technical alterations and do not guarantee the correctness of indicated data. The dimensions can vary and are design dependant.
Please note the preface. Partial extractions from the data sheets may lead to an incorrect equipment select Rev.1.0 / 01.09.2013
241 新北市三重區重新路五段609巷14號6F-12
6F-12, No. 14 Lane 609, Sec. 5, Chung Hsin Rd., Sanchung Dist., New Taipei City, 24159 Taiwan (R.O.C.)
Tel: +886-(2)-2278-9818 | Fax:+886-(2)-2278-9608 | Mobile: +886-(0)-933219827
Email: service@germanway.com.tw